AWD-T3-VR Lexcen

[sands vsParticipant vs commodore View build HERE Member since: March 1, 2015 Posts: 619]

coming along well mate, really well thought out build.  I hope its competitive too. Be cool to hear full song screaming past

• This reply was modified 8 years, 8 months ago by  sands vs.

[Anonymous View build HERE Member since: January 1, 1970 Posts: 0]

sands vs wrote:

coming along well mate, really well thought out build. I hope its competitive too. Be cool to hear full song screaming past

Thanks Sands, even if it’s not competitive it’ll still be a bundleOfun and was only ever going to be a Toy as it doesn’t really fit any “Class”..

—————

Today End! 

Frustration continues… plugged all my gear back in this morning, bzzz nothing no Dash, “Car not found” error on EFI Live…

Fiddled a bit talked to Justin tried a few things if I hot wire it I can get the dash up, only error is an ABS one but that’s expected seeing there’s no Master Cylinder in the car, sucked the calibration out disabled VATS still no go…

I can “dodgy” the wiring and make it all work/run as there’s no Starter Signal currently but I’d like to get it working correctly if I can… enough for today my brain hurts..

[Anonymous View build HERE Member since: January 1, 1970 Posts: 0]

I’m sure this thing is messing with me because it can….

Went down and did a few checks, all ok other than 1 loose ground, I untaped my surplus loom and traced a lot of the suspect wires back to their origins then checked the loom in the car, all good..

Spoke to Justin on the phone and told him my findings, he pulled up the circuit diagrams and suggested to test one of the fuses…

I had already tested it for continuity and the Fluke beeped happily away, Justin said try it for Voltage… BZZZZ “404 Voltage not found” argghh swap in a fresh Fuse turned the Key on and it’s fixed!! I have Indicators, Reverse lights, Starter, Throttle, Gear display on the dash and everything functions as needed!  MFer…

I was seriously starting to think it was time to hang up the tools and settle into dementia.. Lesson learned so all good!

[VRSenator065Participant Adelaide SAVR Senator LSx454 1960 Kombi (project) 1921 Nash Hot Rod (future project) View build HERE Member since: February 17, 2015 Posts: 5 777]

Anonymous wrote:

I’m sure this thing is messing with me because it can…. 

Said every car guy at some stage of every build

[Anonymous View build HERE Member since: January 1, 1970 Posts: 0]

VRSenator065 wrote:

IJ. wrote:

I’m sure this thing is messing with me because it can….

Said every car guy at some stage of every build

LOL yeah funny how that works!  :XD:

——————

Today End!

Wiring is 99.95% done, just have to mount the Window switches and Wire up and mount the TRAC and PWR buttons!

Created a neatness this afternoon and I’m happy with it!

 

 

[Anonymous View build HERE Member since: January 1, 1970 Posts: 0]

CBF’d weekend….

I did go down and plumb my windscreen washers up as VR/VZ run the bottle on opposite sides of the car, found some genius had fitted the 1 way valve backwards…

Also trimmed up my Shifter Cover so it fits properly now with all the new wiring, worked out a spot for a bracket to hold the Window switches and PWR/TRAC buttons.

[Anonymous View build HERE Member since: January 1, 1970 Posts: 0]

Today End!

Did my Tow Straps, nice of Holden to leave a handy cutout in the rear bumper!!

Also made my mount for the Window Switches and PWR/TRAC buttons, I think it came out well!

[VRSenator065Participant Adelaide SAVR Senator LSx454 1960 Kombi (project) 1921 Nash Hot Rod (future project) View build HERE Member since: February 17, 2015 Posts: 5 777]

Hell yea, very neat.

[Anonymous View build HERE Member since: January 1, 1970 Posts: 0]

VRSenator065 wrote:

Hell yea, very neat.

Thanks Gary, given the limited space I had and the big bulky OEM switches I’m well pleased!

[Anonymous View build HERE Member since: January 1, 1970 Posts: 0]

Today End!

Bit of a “DOH” moment today, installed the Steering and Brakes now all the Wiring is sorted, haven’t had the Coils in while the Booster was on.. BZZZZZ do not pass go..

Was thinking of a full Coil relocation for that side but had a fiddle and with a bit of a rework on the bracket I was able to get them in!

Also trimmed the front Airdam so it can turn with the big tyres fitted.

2nd pic is the “Leftovers”… considering I already binned a LOT of the VR loom it’s a lot…

[VRSenator065Participant Adelaide SAVR Senator LSx454 1960 Kombi (project) 1921 Nash Hot Rod (future project) View build HERE Member since: February 17, 2015 Posts: 5 777]

^bloody hell, that’s a lot of wire, be a couple of kg’s there?

[Anonymous View build HERE Member since: January 1, 1970 Posts: 0]

VRSenator065 wrote:

^bloody hell, that’s a lot of wire, be a couple of kg’s there?

Yeah easily!

————-

Today End!

Dash Day!!

Had to integrate the VZ switches into the VR dash cover so took a bit of time, everything functions, I need to check the pinouts on the VR Hazard switch to see if I can splice it in.

[VRSenator065Participant Adelaide SAVR Senator LSx454 1960 Kombi (project) 1921 Nash Hot Rod (future project) View build HERE Member since: February 17, 2015 Posts: 5 777]

^sooo want to be sitting in there…..

[Anonymous View build HERE Member since: January 1, 1970 Posts: 0]

VRSenator065 wrote:

^sooo want to be sitting in there…..

LOL I’m of 2 minds about that now it’s getting closer… 

[KroozerParticipant Forbes, NSW91 VN SS View build HERE Member since: February 19, 2015 Posts: 336]

Dash and cluster look pretty good in that pic 

Toyota Badge on the front not so good…  hahaha

[VRSenator065Participant Adelaide SAVR Senator LSx454 1960 Kombi (project) 1921 Nash Hot Rod (future project) View build HERE Member since: February 17, 2015 Posts: 5 777]

There’s not a lot of Toyota left in it….

[Anonymous View build HERE Member since: January 1, 1970 Posts: 0]

Kroozer wrote:

Dash and cluster look pretty good in that pic Toyota Badge on the front not so good… hahaha

Thanks, it’s “good” from about 3M away, up close not so much, but it is all functional so I’m happy with it, it was never going to be a show piece, I mainly did it as a piss take on one of my old Toyota mates..  :XD:

 

VRSenator065 wrote:

There’s not a lot of Toyota left in it….

Say’s Toyota on the VIN plate!! 

[VRSenator065Participant Adelaide SAVR Senator LSx454 1960 Kombi (project) 1921 Nash Hot Rod (future project) View build HERE Member since: February 17, 2015 Posts: 5 777]

Anonymous wrote:

Say’s Toyota on the VIN plate!!

We could always fix that for you

[Anonymous View build HERE Member since: January 1, 1970 Posts: 0]

Nah it’s unique 

[VRSenator065Participant Adelaide SAVR Senator LSx454 1960 Kombi (project) 1921 Nash Hot Rod (future project) View build HERE Member since: February 17, 2015 Posts: 5 777]

I like it, we all know it has body by Toyota, soul by Holden 

[Author]

Posts