[CraigParticipant New ZealandVZ SV6 / R8 & VS GTS M6 View build HERE Member since: August 4, 2015 Posts: 16]

Final update on this build was not as planned haha. Ended up buying a W1 and selling all the bits off the VZ that’s the end of that build.

[CraigParticipant New ZealandVZ SV6 / R8 & VS GTS M6 View build HERE Member since: August 4, 2015 Posts: 16]

UPDATE

just got the LS2 up and running and came across a LS3 with a walkinshaw harrop supercharger so now that’s going in. It never ends

• This reply was modified 7 years, 5 months ago by  Craig.

[CraigParticipant New ZealandVZ SV6 / R8 & VS GTS M6 View build HERE Member since: August 4, 2015 Posts: 16]

Cheers

[CraigParticipant New ZealandVZ SV6 / R8 & VS GTS M6 View build HERE Member since: August 4, 2015 Posts: 16]

Hi mate, I have a set of walky TTB to fit on my VS GTS. How did you get the bonnet to close without cutting a hole?

[CraigParticipant New ZealandVZ SV6 / R8 & VS GTS M6 View build HERE Member since: August 4, 2015 Posts: 16]

New suspension. Have also purchased a whiteline front swaybar, link arms and K Mac front strut tops. Also purchased new bushes for the whole car.

Attachments:

You must be logged in to view attached files.

[CraigParticipant New ZealandVZ SV6 / R8 & VS GTS M6 View build HERE Member since: August 4, 2015 Posts: 16]

New engine, and HSV dash all fitted, took 3 days fitting climate air etc and wiring loom. Car has SS headlights and taillights, since fitted a VZ SS rear boot spoiler and will be fitting fluted gaurds.

• This reply was modified 8 years, 9 months ago by  Craig.

Attachments:

You must be logged in to view attached files.

[CraigParticipant New ZealandVZ SV6 / R8 & VS GTS M6 View build HERE Member since: August 4, 2015 Posts: 16]

Interior out

amd when first brought the car years ago…..

• This reply was modified 8 years, 9 months ago by  Craig.

Attachments:

You must be logged in to view attached files.

[CraigParticipant New ZealandVZ SV6 / R8 & VS GTS M6 View build HERE Member since: August 4, 2015 Posts: 16]

The only parts that I couldn’t use were, the dash pad, front seat rail, clutch brake pedal. I had replacement parts for these. The front rim was fine, had them checked and repainted etc, came up great. Promise to get some photos up soon.

Just ordered some K Mac adjustable strut tops today.

[CraigParticipant New ZealandVZ SV6 / R8 & VS GTS M6 View build HERE Member since: August 4, 2015 Posts: 16]

Got the dash all in, just finishing the body loom into the boot, fitting the rear parcel tray speakers etc.

This week, finish the loom, then get the suspension bits all painted up, cross member etc. Then under seal and fit suspension, got some Coilovers etc to fit.

[CraigParticipant New ZealandVZ SV6 / R8 & VS GTS M6 View build HERE Member since: August 4, 2015 Posts: 16]

Looks like I worked it out…..

[CraigParticipant New ZealandVZ SV6 / R8 & VS GTS M6 View build HERE Member since: August 4, 2015 Posts: 16]

Would love to add photos, how do I do this from my iPad?

Attachments:

You must be logged in to view attached files.

[Author]

Posts