Home›Forums›Technical – General›Driveline›Feedback on eaton truetrack diffs

This topic contains 22 replies, has 8 voices, and was last updated by Profile photo of Slow355 Slow355 8 years ago.

Viewing 3 posts - 21 through 23 (of 23 total)
1 2
  • Author
    Posts
  • March 11, 2016 at 1:36 pm #14981
    Profile photo of VS 355 UTE
    VS 355 UTE
    Participant
    Member since: January 13, 2016
    Posts: 141

    Wasn’t aware you were running a blower,that’ll sort your diff out.Mine’s not built for the quarter either,nothing wrong with that.

    Like to check out your ride,sounds tuff.Have you got a build thread going?

    May 5, 2016 at 9:01 pm #16591
    Profile photo of dave
    dave
    Participant
    Member since: March 6, 2015
    Posts: 46

    hi, Had standard M78 borgwarner 4 pinion lsd which sometimes would not lock up. Recently fitted harrop true trac centre. Works very well. Drive normally around corners etc and free wheels nicely. Put some power into it and always two wheels are locked together and spinning.

    May 5, 2016 at 9:19 pm #16592
    Profile photo of Slow355
    Slow355
    Participant
    Member since: March 2, 2015
    Posts: 322

    But make sure u select gears first as different trutrack for different gear sets

    munch munch ls1s for lunch
    Best 1/4 mile 13.1@105mph 60ft-1.8sec Reaction time .8 sec 0/100-4.8sec

  • Author
    Posts
Viewing 3 posts - 21 through 23 (of 23 total)
1 2

You must be logged in to reply to this topic.