VR Brake & ABS Circuit - CommodoresPlus

This topic contains 3 replies, has 3 voices, and was last updated by SLO 05L 8 years, 3 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)

Author

Posts
April 10, 2015 at 1:09 pm #4442
VRSenator065
Participant
- Adelaide SA
- VR Senator LSx454 1960 Kombi (project) 1921 Nash Hot Rod (future project)
- View build HERE
Member since: February 17, 2015
Posts: 5 777
I relocated my ABS in my VR, I made up these diagrams at the time to make sure everything was spot on, might be useful to someone.
May 25, 2015 at 8:48 pm #7237
SSEN8R VS #1081
Participant
- Brisbane, North Side
- \'97 VS II HSV Senator 185i
- View build HERE
Member since: March 16, 2015
Posts: 227
Where did you relocated to? for aesthetics or did the motor hit?

My build thread - http://www.commodoresplus.com.au/forums/topic/vs-ii-senator-185i-1081/
My track day thread - http://www.commodoresplus.com.au/forums/topic/lakeside-track-sprint-day-second-go/
My VS brake upgrade thread - http://www.commodoresplus.com.au/forums/topic/vs-brake-upgrades/
May 27, 2015 at 5:07 am #7266
VRSenator065
Participant
- Adelaide SA
- VR Senator LSx454 1960 Kombi (project) 1921 Nash Hot Rod (future project)
- View build HERE
Member since: February 17, 2015
Posts: 5 777
Moved it to where the battery normally is (battery is in boot). Did it for a combination of reasons. I wanted room, but also less messy. Not sure the engine would hit it, although it would be close, but much easier to access plugs etc that side and to remove engine.
January 22, 2016 at 1:11 am #13537
SLO 05L
Participant
- Casino Nsw
- 07 nissan patrol wagon 3.0l cr
- View build HERE
Member since: March 17, 2015
Posts: 38
This will help a lot thank u
Author

Posts

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.