LUBE UP 2.0

[LUBE UPParticipant QLDTurbo ls1 vr aero View build HERE Member since: March 15, 2015 Posts: 24]

hi all, most of you would of seen my old vr, I had that car a long time and was a bit over it so it’s time for something new. My wife and I have been building this vh for the last year and it’s come a long way. It’s going to be running the motor, turbo, gearbox setup out of the vr and should walk straight in to the 9’s.

[vs manta 218Participant Vs hsv manta View build HERE Member since: March 2, 2015 Posts: 796]

I like this thread all ready

[LUBE UPParticipant QLDTurbo ls1 vr aero View build HERE Member since: March 15, 2015 Posts: 24]

I can’t get pictures to work for some reason

[LUBE UPParticipant QLDTurbo ls1 vr aero View build HERE Member since: March 15, 2015 Posts: 24]

 

[LUBE UPParticipant QLDTurbo ls1 vr aero View build HERE Member since: March 15, 2015 Posts: 24]

 

[VRSenator065Participant Adelaide SAVR Senator LSx454 1960 Kombi (project) 1921 Nash Hot Rod (future project) View build HERE Member since: February 17, 2015 Posts: 5 777]

Love the green

[Vkbt1Participant VictoriaMany commodores. View build HERE Member since: March 1, 2015 Posts: 82]

Looking good need more pics (:

[LUBE UPParticipant QLDTurbo ls1 vr aero View build HERE Member since: March 15, 2015 Posts: 24]

Will put up more pics when I get time.

 

• This reply was modified 9 years ago by  LUBE UP.
• This reply was modified 9 years ago by  LUBE UP.
• This reply was modified 9 years ago by  LUBE UP.

[LUBE UPParticipant QLDTurbo ls1 vr aero View build HERE Member since: March 15, 2015 Posts: 24]

• This reply was modified 9 years ago by  LUBE UP.

[LUBE UPParticipant QLDTurbo ls1 vr aero View build HERE Member since: March 15, 2015 Posts: 24]

 

[ajvx01Participant adelaideVC 308 taxi bt1 wanna be! View build HERE Member since: March 2, 2015 Posts: 102]

love it!

[DougallParticipant Townsville, nth qldVl calais turbo View build HERE Member since: April 3, 2015 Posts: 60]

Super cool!

Ahh the hate love of the vl life ....today I love it!

[LUBE UPParticipant QLDTurbo ls1 vr aero View build HERE Member since: March 15, 2015 Posts: 24]

• This reply was modified 9 years ago by  LUBE UP.

[vs manta 218Participant Vs hsv manta View build HERE Member since: March 2, 2015 Posts: 796]

That looks mint man

[LUBE UPParticipant QLDTurbo ls1 vr aero View build HERE Member since: March 15, 2015 Posts: 24]

Thanks mate, has been a lot of work put in to it.

[vs manta 218Participant Vs hsv manta View build HERE Member since: March 2, 2015 Posts: 796]

It is a lot of work that’s for sure

Have you sold the aero roller yet ??

Should get low 10s now been a bit lighter, are you caging this one?

[EJ DUDEParticipant Perth1963 EJ Special View build HERE Member since: March 2, 2015 Posts: 39]

vs manta 218 wrote:

That looks mint man

 

i just needed to repost this again. Damn. That wheel and colour choice.

[LUBE UPParticipant QLDTurbo ls1 vr aero View build HERE Member since: March 15, 2015 Posts: 24]

hey mate, the vr is long gone, this setup ran 10.1 in the vr (on 98 pump fuel) so I’m hoping to run around 9.6 9.7 as I’m switching to e85. and yes it will get a cage at some stage.

[Wogan01Participant Perth79 VB SL View build HERE Member since: April 19, 2015 Posts: 16]

Hey mate that is one fine looking paint job!! Did you take it back to bare metal yourself and if so, what process did you use? I imagine sanding the whole thing back would take forever. Love the look of the rear end too.

Cheers

~~R.I.P VT SS S1 9C1 ~~
...:::::VB 253 SL on the road to being a street cruiser:::::...

[LUBE UPParticipant QLDTurbo ls1 vr aero View build HERE Member since: March 15, 2015 Posts: 24]

All paint and panel work was done by Wilkys pro Paintz.

[Author]

Posts