HSV Manual Gearknob (VN-VS era)

This topic contains 68 replies, has 12 voices, and was last updated by Anonymous 8 years ago.

Viewing 20 posts - 1 through 20 (of 70 total)

1 2 … 4 →

Author

Posts
March 19, 2015 at 9:09 pm #3077
SSEN8R VS #1081
Participant
- Brisbane, North Side
- \'97 VS II HSV Senator 185i
- View build HERE
Member since: March 16, 2015
Posts: 227
Right so mine is starting to look pretty shabby, see attachment. Been looking on ebay regularly and one finally appeared… $350, WTF, not even new! http://www.ebay.com.au/itm/181693591842

I’ll pass… Surely be cheaper to get mine retrimmed.
- This topic was modified 9 years, 1 month ago by SSEN8R VS #1081.
Attachments:
You must be logged in to view attached files.
My build thread - http://www.commodoresplus.com.au/forums/topic/vs-ii-senator-185i-1081/
My track day thread - http://www.commodoresplus.com.au/forums/topic/lakeside-track-sprint-day-second-go/
My VS brake upgrade thread - http://www.commodoresplus.com.au/forums/topic/vs-brake-upgrades/
March 19, 2015 at 9:19 pm #3080
Anonymous
Member since: January 1, 1970
Posts: 0
Check my thread for what I did. Same problem.
March 19, 2015 at 9:41 pm #3081
SSEN8R VS #1081
Participant
- Brisbane, North Side
- \'97 VS II HSV Senator 185i
- View build HERE
Member since: March 16, 2015
Posts: 227
Cheers FLI. Where did you get the momo one from?

I think i’ll look at getting mine retrimmed if I can find someone that can do the HSV stamp in it.

Mate that I got the car from (8 years ago) said he looked at getting a new one when he first got it (5 years before that) but the stamp wasn’t deep. Just if he bought a dozen of em!

My build thread - http://www.commodoresplus.com.au/forums/topic/vs-ii-senator-185i-1081/
My track day thread - http://www.commodoresplus.com.au/forums/topic/lakeside-track-sprint-day-second-go/
My VS brake upgrade thread - http://www.commodoresplus.com.au/forums/topic/vs-brake-upgrades/
March 20, 2015 at 7:23 am #3094
Anonymous
Member since: January 1, 1970
Posts: 0
Ebay. Just under $100 and its beautiful quality. There is a new VT HSV knob on there which is what I really wanted as I have the 6 speed and they want $900 for it!! I offered them $400 and then said no lol.
March 20, 2015 at 9:05 am #3099
VRSenator065
Participant
- Adelaide SA
- VR Senator LSx454 1960 Kombi (project) 1921 Nash Hot Rod (future project)
- View build HERE
Member since: February 17, 2015
Posts: 5 777
I think its the future though, these cars are going to start getting harder and harder to find genuine parts for. Once they start falling into the genuine restoration category (they are just on the cusp of that imo), prices will just climb and climb as people want genuine or nothing else. Basic market economics really, as availability goes down but demand goes up, prices increase.
March 20, 2015 at 9:47 am #3105
cava454
Moderator
- 93 VR BT1
- View build HERE
Member since: February 20, 2015
Posts: 2 390
I stuffed up. There was a roller for sale not long ago with this consol setup and leather Devonish interior. He wanted 2k for the whole car. If only I knew.

damn
March 20, 2015 at 10:07 am #3108
Kroozer
Participant
- Forbes, NSW
- 91 VN SS
- View build HERE
Member since: February 19, 2015
Posts: 336
cava454 wrote:

I stuffed up. There was a roller for sale not long ago with this consol setup and leather Devonish interior. He wanted 2k for the whole car. If only I knew. damn

What the hell! If your not going to buy it post it up so someone else can!
April 7, 2015 at 2:52 pm #4122
VPGTS76
Participant
- VP GTS Build 076
- View build HERE
Member since: March 2, 2015
Posts: 33
Hi Boys….

I have the HSV stamp used in the day..

if I make reproduction knobs what are they worth?

Thanks

Daniel
April 7, 2015 at 4:04 pm #4133
VRSenator065
Participant
- Adelaide SA
- VR Senator LSx454 1960 Kombi (project) 1921 Nash Hot Rod (future project)
- View build HERE
Member since: February 17, 2015
Posts: 5 777
So we are taking correct period reproduction of early (VR) manual HSV gear knobs?
April 7, 2015 at 5:19 pm #4163
VPGTS76
Participant
- VP GTS Build 076
- View build HERE
Member since: March 2, 2015
Posts: 33
Correct…

If you take leather off it is a T5 knob wrapped in leather.

I have the HSV leather stamp..
April 7, 2015 at 5:41 pm #4164
SSEN8R VS #1081
Participant
- Brisbane, North Side
- \'97 VS II HSV Senator 185i
- View build HERE
Member since: March 16, 2015
Posts: 227
Sign me up VPGTS76, I WANT ONE! I would be doing a run of a hundred if I was you… if you can find the T5 knobs…

I wondered if it was the T5 knob underneath as I can just see the circle that goes around the gear pattern on mine…

My build thread - http://www.commodoresplus.com.au/forums/topic/vs-ii-senator-185i-1081/
My track day thread - http://www.commodoresplus.com.au/forums/topic/lakeside-track-sprint-day-second-go/
My VS brake upgrade thread - http://www.commodoresplus.com.au/forums/topic/vs-brake-upgrades/
April 7, 2015 at 5:44 pm #4165
SSEN8R VS #1081
Participant
- Brisbane, North Side
- \'97 VS II HSV Senator 185i
- View build HERE
Member since: March 16, 2015
Posts: 227
this pic gives you a good idea of what it should look like.

My build thread - http://www.commodoresplus.com.au/forums/topic/vs-ii-senator-185i-1081/
My track day thread - http://www.commodoresplus.com.au/forums/topic/lakeside-track-sprint-day-second-go/
My VS brake upgrade thread - http://www.commodoresplus.com.au/forums/topic/vs-brake-upgrades/
April 7, 2015 at 6:36 pm #4168
Anonymous
Member since: January 1, 1970
Posts: 0
I’d pay $300 tomorrow for a brand new one.
April 7, 2015 at 6:41 pm #4171
VRSenator065
Participant
- Adelaide SA
- VR Senator LSx454 1960 Kombi (project) 1921 Nash Hot Rod (future project)
- View build HERE
Member since: February 17, 2015
Posts: 5 777
I’m in, never know if/when I go manual. Although a Hollinger sequential box is my pick
- This reply was modified 9 years ago by VRSenator065.
April 7, 2015 at 6:44 pm #4172
Kroozer
Participant
- Forbes, NSW
- 91 VN SS
- View build HERE
Member since: February 19, 2015
Posts: 336
SSEN8R VS #1081 wrote:

Sign me up VPGTS76, I WANT ONE! I would be doing a run of a hundred if I was you… if you can find the T5 knob

Why not sell them on an exchange basis, customer sends you their old HSV/T5 knob then you return them a New Leather HSV one
April 7, 2015 at 7:13 pm #4178
vs manta 218
Participant
- Vs hsv manta
- View build HERE
Member since: March 2, 2015
Posts: 796
I only have one of these for my VS

Make these but in a 5 speed and R in 6th spot

But I’ll just keep this one as I have 6speed

And I’m with Gary but I’m goin a PPG t56 sequential dog box

Much cheaper then a hollenger and still uses a normal clutch and slave ciylendar so it’s a straight bolt in
- This reply was modified 9 years ago by vs manta 218.
Attachments:
You must be logged in to view attached files.
April 8, 2015 at 12:01 am #4216
VPGTS76
Participant
- VP GTS Build 076
- View build HERE
Member since: March 2, 2015
Posts: 33
Ill do some homework….

Bit on ATM
April 8, 2015 at 3:52 pm #4261
VRSenator065
Participant
- Adelaide SA
- VR Senator LSx454 1960 Kombi (project) 1921 Nash Hot Rod (future project)
- View build HERE
Member since: February 17, 2015
Posts: 5 777
VPGTS76 wrote:

Bit on ATM

your telling me, I’m busier than a one legged man in an ass kicking competition!
April 21, 2015 at 12:27 pm #5184
sv89#170
Participant
- Nsw
- VN SV89, VN Plus 6, Vs clubsport
- View build HERE
Member since: March 4, 2015
Posts: 55
A mate and I are keen for a couple of these too if you end up making them and thanks ssen8r for the link
June 9, 2015 at 3:54 pm #7540
SSEN8R VS #1081
Participant
- Brisbane, North Side
- \'97 VS II HSV Senator 185i
- View build HERE
Member since: March 16, 2015
Posts: 227
any updates on gear knobs VPGTS76?

My build thread - http://www.commodoresplus.com.au/forums/topic/vs-ii-senator-185i-1081/
My track day thread - http://www.commodoresplus.com.au/forums/topic/lakeside-track-sprint-day-second-go/
My VS brake upgrade thread - http://www.commodoresplus.com.au/forums/topic/vs-brake-upgrades/
Author

Posts