Home›Forums›Technical – General›Body & Paint›Modify radiator support vk This topic contains 2 replies, has 2 voices, and was last updated by Red1m8 5 years, 3 months ago. Viewing 3 posts - 1 through 3 (of 3 total) Author Posts June 9, 2015 at 4:45 pm #7543 VKJZParticipant Brisbane1999 Rodeo View build HERE Member since: March 2, 2015 Posts: 23 What’s the legalities of modifying the radiator support? Need to cut 2x 2.5″ square holes in each side of the radiator support for Intercooler piping. This will be a qld registered car so will this affect rwc / mod plating? Is it actually a structural part of the car and will reinforcing around the cut get me away with it? June 9, 2015 at 6:46 pm #7548 VKJZParticipant Brisbane1999 Rodeo View build HERE Member since: March 2, 2015 Posts: 23 Also dunno if this is the right area to post haha June 10, 2015 at 8:17 am #7554 Red1m8Participant NZTurbo VX LSx Turbo VK in the build View build HERE Member since: April 10, 2015 Posts: 98 Not sure what regulations you have to deal with, but have heard of VL radiator support being used. i chopped mine out and made something from scratch to suit. Author Posts Viewing 3 posts - 1 through 3 (of 3 total) You must be logged in to reply to this topic.