Home›Forums›Technical – General›ECU & Tuning›Engine swap electrics headache This topic contains 3 replies, has 3 voices, and was last updated by klampykixx 4 years, 4 months ago. Viewing 4 posts - 1 through 4 (of 4 total) Author Posts November 23, 2016 at 9:16 pm #20711 klampykixxParticipant Coffs HarbourFord Econovan View build HERE Member since: May 16, 2015 Posts: 167 Hi forum. Moving along smoothly so far with the conversion in my van but I have a question before the headache arises. Is there anyway I can run an ecotec on just the ecu with a non VATS setup? I’ve got a complete vx setup with a mid bcm (313) and if I can get around it I’d be super happy. I’ve got the key head so if I have to I’ll just setup the whole wiring to run it as it’s supposed to but chasing wiring diagrams is painful. Any help or input will be appreciated thanks November 23, 2016 at 10:14 pm #20715 StevossParticipant NewyVQP Ute View build HERE Member since: August 27, 2016 Posts: 73 look too the v6 conversions webpage. pretty sure it has all the info about the vats November 24, 2016 at 5:09 pm #20725 gtrboyyParticipant gtrboyy1.6 Getz View build HERE Member since: January 20, 2016 Posts: 201 Pay Joe (2inil8) for memcal mods that you want like diasble vats & correct shift changes if auto & your diff gears or whatever other mods got planned. Joe is on aussiev8s & few other forums…probably here also,think he’s out west sydney or you hit up pcmhacking boys. Simple. November 26, 2016 at 8:15 pm #20762 klampykixxParticipant Coffs HarbourFord Econovan View build HERE Member since: May 16, 2015 Posts: 167 Thanks guys, I’m just gonna do my best to rig up the majority of the vx setup Author Posts Viewing 4 posts - 1 through 4 (of 4 total) You must be logged in to reply to this topic.