Home›Forums›Technical – General›Engine›Wheel reluctor swap

This topic contains 3 replies, has 2 voices, and was last updated by Profile photo of  Anonymous 3 years, 8 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • August 15, 2020 at 5:21 pm #32746
    Profile photo of bigboyVKLS
    bigboyVKLS
    Participant
    Member since: July 17, 2016
    Posts: 25

    Hello

    where I could find the place that’s can get swap from 58x to 24x in western suburb of Melbourne ?? So I can send the crank shaft to them ..

     

    thanks

    August 15, 2020 at 5:47 pm #32747
    Profile photo of
    Anonymous Member since: January 1, 1970
    Posts: 0

    Did mine myself, wasn’t all that hard..

     

    August 15, 2020 at 5:52 pm #32748
    Profile photo of bigboyVKLS
    bigboyVKLS
    Participant
    Member since: July 17, 2016
    Posts: 25

    Need special tool for this ?? Or hammer it ??

    August 15, 2020 at 6:10 pm #32749
    Profile photo of
    Anonymous Member since: January 1, 1970
    Posts: 0

    Heat shrink, I used a digi temp gun, just heat it up evenly to temp then drop it on and let cool, been going 100,000 Km now now probs.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.