VR Senator with LSx454

[sands vsParticipant vs commodore View build HERE Member since: March 1, 2015 Posts: 619]

still has the cutouts for the intake ?

[Judge1 FrazerParticipant new zealand1983 VB LSA MG9 6060 6 speed View build HERE Member since: February 5, 2016 Posts: 775]

that looks awesome Gary

[VRSenator065Participant Adelaide SAVR Senator LSx454 1960 Kombi (project) 1921 Nash Hot Rod (future project) View build HERE Member since: February 17, 2015 Posts: 5 777]

Yep still has the cut outs for the CAI 

[VRSenator065Participant Adelaide SAVR Senator LSx454 1960 Kombi (project) 1921 Nash Hot Rod (future project) View build HERE Member since: February 17, 2015 Posts: 5 777]

And that’s the bonnet just about done

[Anonymous View build HERE Member since: January 1, 1970 Posts: 0]

mmm so shiny

[VRSenator065Participant Adelaide SAVR Senator LSx454 1960 Kombi (project) 1921 Nash Hot Rod (future project) View build HERE Member since: February 17, 2015 Posts: 5 777]

Anonymous wrote:

mmm so shiny

coz NOT racecar

[Anonymous View build HERE Member since: January 1, 1970 Posts: 0]

LMAO 

[cava454Moderator 93 VR BT1 View build HERE Member since: February 20, 2015 Posts: 2 390]

Gary.

You have a tailshaft speed sensor setup correct? If so can you steer me to the posts where/how you set it up.

 

Thanks

[VRSenator065Participant Adelaide SAVR Senator LSx454 1960 Kombi (project) 1921 Nash Hot Rod (future project) View build HERE Member since: February 17, 2015 Posts: 5 777]

Hi Cav, sorry mate been OS.  Pics below.

[cava454Moderator 93 VR BT1 View build HERE Member since: February 20, 2015 Posts: 2 390]

All good mate. What parts did you use. ?

[VRSenator065Participant Adelaide SAVR Senator LSx454 1960 Kombi (project) 1921 Nash Hot Rod (future project) View build HERE Member since: February 17, 2015 Posts: 5 777]

Tbh,I can’t remember, we made up an aluminium plate that bolted between the trans mount and trans, I am not sure what the speed sensor was off.  The chop disc was if I remember rightly off a T400 and we just machined it as a press fit on the tail shaft.

[cava454Moderator 93 VR BT1 View build HERE Member since: February 20, 2015 Posts: 2 390]

All good cheers man.

Whats come of this? Had Brenton finished or what?

[VRSenator065Participant Adelaide SAVR Senator LSx454 1960 Kombi (project) 1921 Nash Hot Rod (future project) View build HERE Member since: February 17, 2015 Posts: 5 777]

I feel like its taken forever, I’ve been away for work for a couple of weeks, I believe the heads are finished, I am hoping he is coming up Wednesday night to fit them and measure up for the pushrods…

[VRSenator065Participant Adelaide SAVR Senator LSx454 1960 Kombi (project) 1921 Nash Hot Rod (future project) View build HERE Member since: February 17, 2015 Posts: 5 777]

Well finally then day has arrived, Brenton delivered the heads and look fantastic.  So we measured the ptv clearance, and there’s heaps, so he measured up for push rods which we will order and should have by the end of the week.  So then its me doing the final assy of the heads etc, then get it down on the engine dyno to see what its capable of.  Then all being well it will be back in time for me to get it back in the car over my Christmas break.  Can not wait!!!

[Judge1 FrazerParticipant new zealand1983 VB LSA MG9 6060 6 speed View build HERE Member since: February 5, 2016 Posts: 775]

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!DAM!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[sands vsParticipant vs commodore View build HERE Member since: March 1, 2015 Posts: 619]

Looking good, where will you be getting the push rods from?

[VRSenator065Participant Adelaide SAVR Senator LSx454 1960 Kombi (project) 1921 Nash Hot Rod (future project) View build HERE Member since: February 17, 2015 Posts: 5 777]

Well slow and steady wins the race, just been slowly putting it all back together over the last couple of nights.  Close to all I can do until I get the pushrods (sands vs not sure Brenton has ordered them).  Very satisfying slowly and methodically piecing it back together.

The million dollar question is if the rockers with 750 though of lift will fit under the rocker covers.  I hope so as I like the look of them.  If not anyone know if you can buy spacers plates to give more room?

[cava454Moderator 93 VR BT1 View build HERE Member since: February 20, 2015 Posts: 2 390]

Got more photos of how the coil are mounted.

[VRSenator065Participant Adelaide SAVR Senator LSx454 1960 Kombi (project) 1921 Nash Hot Rod (future project) View build HERE Member since: February 17, 2015 Posts: 5 777]

cava454 wrote:

Got more photos of how the coil are mounted.

will do Cav.

[sands vsParticipant vs commodore View build HERE Member since: March 1, 2015 Posts: 619]

VRSenator065 wrote:

Very satisfying slowly and methodically piecing it back together.      The million dollar question is if the rockers with 750 though of lift will fit under the rocker covers. I hope so as I like the look of them. If not anyone know if you can buy spacers plates to give more room?

 

http://vi.raptor.ebaydesc.com/ws/eBayISAPI.dll?ViewItemDescV4&item=263703853048&category=42610&pm=1&ds=0&t=1527054062000&ver=0 Not sure if they help?

 

or http://store.yellaterra.com.au/rubber-valve-cover-spacers-ls-engines-10mm/

• This reply was modified 5 years, 5 months ago by  sands vs.

[Author]

Posts