VB LSA Commodore build

[Judge1 FrazerParticipant new zealand1983 VB LSA MG9 6060 6 speed View build HERE Member since: February 5, 2016 Posts: 775]

Hey all well after a year from ordering my six pot calliper’s I have them dam they are nice brake porn below

so with the vb v8 getting sold soon I may as-well start my vh build thread so some of the parts that were for the vb are going on the vh now so will post picture of that stuff later on , so recap what I am going to do

lsa or similar depends on when I can afford one

6060 6 speed manual

Heltech ECU

wildwood 6 pots front 343 rotors and 4 pots rear 330 rotors

mini tub rear using factory wheel tub off another car with 9″ Detroit locker adjustable top arms

xyz coilovers in the front and the same out the back

twin 3″ exhaust with remote butter fly to keep noise down

18″ wheels not sure what yet

paint will be white but will have it all going before it’s painted

vb front end chrome bumpers with over riders going to make them and the black plastic trim from steel or  aluminium but still have them black

aluminium drop tank filler behind number plate like hq etc remove existing filler

any way photo’s

2017-09-29 20.49.35 by Frazer Russell[/url], on Flickr

2017-09-29 20.49.06 by Frazer Russell[/url], on Flickr

2017-09-29 20.48.47 by Frazer Russell[/url], on Flickr

2017-08-06 17.07.58 by Frazer Russell[/url], on Flickr

• This topic was modified 5 years, 3 months ago by  Judge1 Frazer.
• This topic was modified 3 years, 8 months ago by  Judge1 Frazer.

[Anonymous View build HERE Member since: January 1, 1970 Posts: 0]

Nice choice in brakes, I run much the same setup on my Tow Car 

Looking forward to more updates!

[cava454Moderator 93 VR BT1 View build HERE Member since: February 20, 2015 Posts: 2 390]

How come your ditching the vb?

[Judge1 FrazerParticipant new zealand1983 VB LSA MG9 6060 6 speed View build HERE Member since: February 5, 2016 Posts: 775]

Thanks Ian had the six pots on the vk so I know they are good ,,

Cava I found the vh with a six in it  a guy owned it for 27 years and still driving at 92,, so a change of plan and I had not gone to far with vb also not wreaking a factory numbered 5ltr sle but it’s 100 time better condition now than when I got it it’s had six birthdays and Christmas all at once  , should get good money for vb

[VRSenator065Participant Adelaide SAVR Senator LSx454 1960 Kombi (project) 1921 Nash Hot Rod (future project) View build HERE Member since: February 17, 2015 Posts: 5 777]

Yea i run the Willwoods too, beautiful brakes.  Pity you cant keep them both

[Judge1 FrazerParticipant new zealand1983 VB LSA MG9 6060 6 speed View build HERE Member since: February 5, 2016 Posts: 775]

VRSenator065 wrote:

Yea i run the Willwoods too, beautiful brakes. Pity you cant keep them both

I look at it this way I can only drive one and I don’t have any feelings for the green one sounds weird I know but I have strong feelings about the vh maybe it’s that my first commodore was a 83 burgundy vh six 23 years ago

plus there are still things I would not be happy with even if they were fixed ,and now some one else get to enjoy a classic that looks and feels way better than when I brought it

[VRSenator065Participant Adelaide SAVR Senator LSx454 1960 Kombi (project) 1921 Nash Hot Rod (future project) View build HERE Member since: February 17, 2015 Posts: 5 777]

Pity you not selling it in a few months, would seriously consider buying it, but all my cash (and wife browny points) are tied up in the motor rebuild

[Judge1 FrazerParticipant new zealand1983 VB LSA MG9 6060 6 speed View build HERE Member since: February 5, 2016 Posts: 775]

Hey Gary problem is I’m in nz shipping would be expensive

[VRSenator065Participant Adelaide SAVR Senator LSx454 1960 Kombi (project) 1921 Nash Hot Rod (future project) View build HERE Member since: February 17, 2015 Posts: 5 777]

Lol, that would kinda put a brake on things!!

[Judge1 FrazerParticipant new zealand1983 VB LSA MG9 6060 6 speed View build HERE Member since: February 5, 2016 Posts: 775]

hey  I got some xyz coil over for the rear that bolt to the bottom arm and some 30 way rebound shocks to got with the front coil overs  ,all so had to see what the six pots looked like on the 343 rotors

2017-10-11 19.22.32 by Frazer Russell[/url], on Flickr

2017-10-11 19.22.26 by Frazer Russell[/url], on Flickr

2017-10-11 19.21.59 by Frazer Russell[/url], on Flickr

2017-10-11 19.21.41 by Frazer Russell[/url], on Flickr

2017-10-08 10.31.53 by Frazer Russell[/url], on Flickr

2017-10-08 10.31.43 by Frazer Russell[/url], on Flickr

2017-10-08 10.31.35 by Frazer Russell[/url], on Flickr

 

[VRSenator065Participant Adelaide SAVR Senator LSx454 1960 Kombi (project) 1921 Nash Hot Rod (future project) View build HERE Member since: February 17, 2015 Posts: 5 777]

Car porn right there 

 

[cava454Moderator 93 VR BT1 View build HERE Member since: February 20, 2015 Posts: 2 390]

Your beautiful brakes make me sick.

[Judge1 FrazerParticipant new zealand1983 VB LSA MG9 6060 6 speed View build HERE Member since: February 5, 2016 Posts: 775]

cava454 wrote:

Your beautiful brakes make me sick.

yes but your motor makes sick I want one

 

[Judge1 FrazerParticipant new zealand1983 VB LSA MG9 6060 6 speed View build HERE Member since: February 5, 2016 Posts: 775]

Hi all started some rust repairs today mate came around to help typical place the boot lip

20180127_104550 by Frazer Russell[/url], on Flickr

20180127_104620 by Frazer Russell[/url], on Flickr

20180127_104631 by Frazer Russell[/url], on Flickr

20180127_104705 by Frazer Russell[/url], on Flickr

20180127_122735 by Frazer Russell[/url], on Flickr

20180127_200849 by Frazer Russell[/url], on Flickr

20180127_200911 by Frazer Russell[/url], on Flickr

amazing what you can do with the right tools

[VRSenator065Participant Adelaide SAVR Senator LSx454 1960 Kombi (project) 1921 Nash Hot Rod (future project) View build HERE Member since: February 17, 2015 Posts: 5 777]

Yea nice work, love seeing people have a go at jobs themselves.

[Judge1 FrazerParticipant new zealand1983 VB LSA MG9 6060 6 speed View build HERE Member since: February 5, 2016 Posts: 775]

Cheers Gary

[Judge1 FrazerParticipant new zealand1983 VB LSA MG9 6060 6 speed View build HERE Member since: February 5, 2016 Posts: 775]

Hey all just a parts up date today scored a 9″ Detroit locker 31 spline second hand but that’s all good very very hard to break them got it for 450 saved 600 not buying new

[VRSenator065Participant Adelaide SAVR Senator LSx454 1960 Kombi (project) 1921 Nash Hot Rod (future project) View build HERE Member since: February 17, 2015 Posts: 5 777]

Wow, now that’s a score, your building up a nice little parts inventory there buddy

• This reply was modified 6 years ago by  VRSenator065.

[Judge1 FrazerParticipant new zealand1983 VB LSA MG9 6060 6 speed View build HERE Member since: February 5, 2016 Posts: 775]

Hey people  looking at a second hand lsa with cog swapper all accessores , ecu  loom ect from the states so Zl1 i think anyway i assume it runs the e38 ecu what are the pros and cons of the ecu,, package about 23 grand between 15,000 – 25,ooo km

[Anonymous View build HERE Member since: January 1, 1970 Posts: 0]

e38’s can be a bit fussy but are quite a powerful ECU..

[Author]

Posts